{UTF-8}
cooling constant=
	0.03
	~	
	~		|

probe temp= INTEG (
	-rate of cooling,
		100)
	~	degrees celsius
	~		|

rate of cooling=
	cooling constant*(probe temp-room temp)
	~	degrees celsius per sec
	~		|

room temp=
	22
	~	degrees celsius
	~		|

********************************************************
	.Control
********************************************************~
		Simulation Control Parameters
	|

FINAL TIME  = 100
	~	Minute
	~	The final time for the simulation.
	|

INITIAL TIME  = 0
	~	Minute
	~	The initial time for the simulation.
	|

SAVEPER  = 
        TIME STEP 
	~	Minute [0,?]
	~	The frequency with which output is stored.
	|

TIME STEP  = 0.25
	~	Minute [0,?]
	~	The time step for the simulation.
	|

\\\---/// Sketch information - do not modify anything except names
V300  Do not put anything below this section - it will be ignored
*View 1
$192-192-192,0,Comic Sans MS|12||0-0-0|0-0-0|0-0-255|-1--1--1|-1--1--1|120,120,100,0
10,1,probe temp,172,136,50,39,3,131,0,1,0,3,0,0,0-0-255,0-0-0,|12||0-0-0
12,2,48,401,139,10,8,0,3,0,0,-1,0,0,0
1,3,5,2,4,0,0,22,0,0,0,-1--1--1,,1|(351,139)|
1,4,5,1,100,0,0,22,0,0,0,-1--1--1,,1|(261,139)|
11,5,48,306,139,6,8,34,3,0,0,1,0,0,0
10,6,rate of cooling,306,161,72,14,40,3,0,0,-1,0,0,0
10,7,room temp,175,246,51,15,8,3,0,2,0,0,0,0,-1--1--1,0-0-0,|12||255-0-0
10,8,cooling constant,380,273,41,28,8,3,0,0,0,0,0,0
1,9,1,6,1,0,0,0,0,64,0,-1--1--1,,1|(220,199)|
1,10,7,6,1,0,0,0,0,64,0,-1--1--1,,1|(268,245)|
1,11,8,6,1,0,0,0,0,64,0,-1--1--1,,1|(327,215)|
12,12,852854,411,537,240,184,3,156,0,0,1,0,0,0
Newtonian_Cooling
///---\\\
:GRAPH Newtonian_Cooling
:TITLE Newtonian Cooling
:SCALE
:VAR probe temp
:Y-MIN 0
:Y-MAX 100
:LINE-WIDTH 3
:VAR room temp
:LINE-WIDTH 3
:L<%^E!@
1:Current.vdf
9:Current
23:0
15:0,0,0,0,0,0
19:100,0
27:2,
34:0,
4:Time
5:rate of cooling
35:Date
36:YYYY-MM-DD
37:2000
38:1
39:1
40:6
41:0
24:0
25:100
26:100